Before the shearing machine is operated, wear tight-fitting protective clothing, fasten the cuffs, and do not open the hem of the jacket. Do not wear, take off your clothes, or wrap your body around the machine to prevent the machine from being twisted. You must wear a safety helmet, braids should be put into the hat, no skirts, slippers.

The shearing machine operator must be familiar with the main structure, performance and use of the shearing machine.

Shearing machine is suitable for cutting various steel plates, copper plates, aluminum plates and non-metallic material plates whose material thickness is the rated value of the machine tool, and must be materials free of hard marks, welding slag, slag inclusions, and welds, and no excessive thickness is allowed.

How to use the shearing machine: adjust the gap of the blade according to the thickness of the material to be cut; adjust the profiling or fixture according to the width of the material to be sheared; make 1-3 empty strokes before the shearing machine is operated, and it can be implemented after normal Cut work.

If it is found that the machine is running abnormally during the use of the shearing machine, immediately cut off the power supply and shut down for inspection.

When adjusting the machine tool of the shearing machine, the power supply must be cut off. When moving the workpiece, pay attention to the safety of the hand.

All parts of the shearing machine should be kept lubricated frequently. The operator should fill the lubricating oil once in each shift, and the mechanic should fill the rolling bearing part with the lubricant once every six months.